For various industries, walk-in coolers are an indispensable asset. After all, it’s about keeping their perishable goods safe and fresh. However, these coolers can face issues over time, no matter how reliable they are. The most common concern is a leaky cooler and the reason in most cases is a damaged or worn-out gasket. In such a case, the best you can do is opting for cooler gasket replacement and revive the efficiency of your cooler.
Why are Gaskets Important for your Walk-In Cooler?
Gaskets are behind the proper functioning of a cooler. These are the flexible seals that act as a barrier between the door and the cooler’s frame. They prevent warm air from going inside the cooling unit. When these gaskets start to wear out, leaks happen that further cause high energy consumption and food spoilage.
How to Identify the Signs of Gasket Wear and Tear?
When the cooler is leaking, it doesn’t always call for cooler gasket replacement. So, it’s better to make sure that replacement is the last option you have. You must always look for visible cracks, tears, or deformities in the gasket material. Also, if there are temperature fluctuations or condensation has suddenly increased inside the cooler, the best you can do is replace the gaskets.
Steps for Walk-in Cooler Gasket Replacement
If you are a DIY person, you can order gaskets online from RefriGaskets and replace them on your own. Here are the steps that can help you with the replacement.
- Collect the Necessary Tools
Before you start with the replacement, ensure that you have all the necessary tools including a screwdriver (if you have ordered screw-in style gaskets), and of course, a replacement gasket that is specifically designed for your cooler model.
- Turn Off the Cooler
To have a safe replacement and save energy, it’s best to turn off the cooler before you start the process. This will prevent any electrical hazards.
- Remove the Old Gasket
To remove the old gasket, carefully pull it off from its track. Don’t pull it excessively to avoid damaging the door track. If the gasket doesn’t come out easily, try heating it up first and then use a flat-head screwdriver carefully alongside the inside of the track to remove it.
- Clean the Gasket Area
This is an important step that you better don’t overlook. Before you place the new gasket in place, remove any dirt, debris, or residue from the gasket area. This will ensure optimal adhesion for the new gasket.
- Install the New Gasket
The next thing to do is to align the new gasket with the door frame and make it sit comfortably. So, line up the new gasket with the door/gasket track and simply push in the centre dart into the track using your thumb or other smooth surface.
You must start by the top 2 corners and then work your way around pushing the dart with a bit of force until it stays connected to the track/door. If you feel that the gasket is too big, massage the gasket into the track until it fits properly. Keep in mind the correct orientation while fitting it.
If you think that this is going to be challenging, it’s better to not take a risk and call for professional help. To ensure the optimal performance of your gaskets, you must keep them clean and check for signs of damage. To place your order for new gaskets, RefriGaskets is the best online store for you.